Friday, November 16, 2012

New NMT version with PCH 300 Support uploaded for approval

Update: Version 3.7.117 is available from the App Store

New NMT Version has been uploaded to the App Store for review and approval

New in version 3.7.117

- Support for PCH 300 (No extra software required on the pch)
- Support for iPhone 5
- Fix network share problem due to new popcorn hour firmware
- Minor bug fixes
Posted by at

18 comments:

  1. AlainNovember 20, 2012 at 5:09 AM

    Hello Theodoros,

    I installed and used the app succesfully the first time.
    However, now after I connect succesfully, I cannot see or select any "Local sources" anymore and also do not see anything in the "Media" screen. The only thing I can do is start a Playlist that I created earlier. Any idea what the problem may be?

    thanks,
    Alain

    ReplyDelete
  2. Theodoros EmmanuelDecember 6, 2012 at 7:06 AM

    Hello,

    Which device are you using?

    Does the refresh button from local sources show anything?

    Can you try to delete the app from the taskbar and lauch again.

    Teo

    ReplyDelete
  3. UnknownDecember 6, 2012 at 11:39 AM

    This comment has been removed by the author.

    ReplyDelete
  4. UnknownDecember 6, 2012 at 11:44 AM

    I am having the same problem as Alain. My device is an iphone 4, running OS 5.1.1.. The app does not discover anything the "Media" screen. In the "Sources" screen, there is no network sources discovered either. Only the local source is discovered but clicking on it, the app just crashes.
    A fix would be much appreciated

    ReplyDelete
    Replies
    1. Theodoros EmmanuelDecember 6, 2012 at 12:32 PM

      Hi,
      which pch model do you have?

      Also check if you are using the latest pch firmware.
      Teo

      Delete
  5. AlainDecember 7, 2012 at 6:49 AM

    Hello,

    I just updated (on my iPad) to the latest release. The app now has become unusable:
    - crashes when I select the SATA disk
    - I get a long list of system folders

    So I can no longer select the right files to play.
    Please fix!

    Alain

    ReplyDelete
  6. AlainDecember 7, 2012 at 7:00 AM

    Also, like others report, the auto-rotate no longer works.
    As a result, only half of the Remote is visible, as it's stuck in Portrait mode, but the Remote is still in Landscape mode.

    ReplyDelete
    Replies
    1. Theodoros EmmanuelDecember 7, 2012 at 7:05 AM

      Please note your pch model (100,200 or 300)

      Teo

      Delete
    2. AlainDecember 7, 2012 at 7:11 AM

      I have the A-210 (in the network it says PCH-A200).

      PS, compared to the last version, the SATA disk now always shows up, so that is solved. HOwever it now crashes when I select it, which it did not do before.

      Delete
  7. AnonymousDecember 8, 2012 at 6:24 AM

    dear all,

    I installed nmt remote with my pch a300,
    it appears in local sources

    in media ...i dont see anything.

    any suggestion
    thank you

    Loic

    ReplyDelete
  8. Dan mediasDecember 9, 2012 at 9:45 AM

    This comment has been removed by the author.

    ReplyDelete
  9. Dan mediasDecember 9, 2012 at 10:22 AM

    Dear All,

    As other users already mentioned, the new version of this app NMT Remote downloaded from the Appstore (3.7.117) dated 4th December does not work for my PCH 110 (with latest firmware).

    The previous version (and all previous versions before) were just fine !

    This latest version of December 4th connects ok to my PCH 110 on the network (named PCH 100), but not showing the Media folder containing my music (Music), or my videos (Video) etc..

    The only directories of the PCH Harddisk which are “viewed” by the App are :

    Bin, dev, etc, home, mnt, modules, opt, proc,
    root, sbin, share-thumbails, sys, tmp, upnp, usr, var (and all the subdirectories under these ones, I can navigate in them).

    And the App runs only in Portrait mode, with a bit of the folder icons “cut” on the left side of the screen.

    Please, fix this App, or replace the actual non working version by the previous one which was entirely ok for my personal use.

    Mainly my use is :
    List my medias on the iPad3, browse to the different music folders, choose a song, and launch it, it reads all the album, and it was ok, with no need to switch on the TV and using the PCH hardware remote to navigate on the TV screen.

    Many thanks for fixing this NMT Remote App quickly.

    Dan

    ReplyDelete
  10. MichelDecember 11, 2012 at 4:09 AM

    Hello,
    Since I bought this product several months ago, I can't use it for the purpose I bought it, namely - to select music to play through 'Sources' (without need to open my TV). The application crashes.
    (I did not update my PCH-A200 to the latest firmware for I fear it is not recommended, having read many issues with it).
    Your urgent assistance is appreciated.
    Thank you.

    ReplyDelete
  11. MichelDecember 11, 2012 at 4:24 AM

    Adding that I am using my iPhone 4, iOS 5.1.1

    ReplyDelete
    Replies
    1. Theodoros EmmanuelDecember 11, 2012 at 4:48 AM

      Hello,
      The new firmware of PCH-200 broke compatibility with NMT.

      An updated version was needed, but also retain complatiblity with older firmware versions for users that didn't update.

      I have upgraded my pch-200 in order to make the new firmware work, and i am trying to resolve this problem.

      Also iOS 6 has broken compatibility with orientation (on the ipad) so i'm working on a fix for both these issues.

      Teo

      Delete
  12. MichelDecember 11, 2012 at 4:59 AM

    (sending as new since Reply doesn't work)
    Thank you for your mail, Teo, but I don't understand.
    Are you saying that newest PCH-200 firmware is a must? Is that THE problem?
    To be honest, I doubt, since I encounter same problem for long, also with your previous version.
    If you can guide me from where to collect crash logs from iPhone, and you send me your email address, I would be happy to send you the crash logs.
    Thanks!
    Michel

    ReplyDelete
    Replies
    1. Theodoros EmmanuelDecember 11, 2012 at 6:26 AM

      Hi,

      no, the new pch-200 is not a must since the lastest nmt remote update works accordingly with the old or new firmware.

      The problem is that i have updated my pch-200 and i have first see how i can downgrade it to the older version so i can test it.

      Teo

      Delete
  13. MichelDecember 11, 2012 at 7:30 AM

    so shall i send you my crash log?
    if yes - please advise from where to take it and where to send it to.
    thanks!
    michel

    ReplyDelete

Subscribe to: Post Comments (Atom)